The Function Keys; The Control Keys - Winbook XP5 User Manual

The Function Keys

There are 12 dedicated function keys located across the top edge of the keyboard. They are
labeled Fl to F12. These keys are used in many different ways, depending on the operating
system and software in use. They are also programmable. See your operating system and
software user's manuals for detailed information.

The Control Keys

There are a number of non-typing keys that issue commands or enable functions as listed below.
Escape
Command:'Esc'
Many applications use this key to cancel a command or exit the application. Refer to your
application manual for details.
Simuiscan
Command:'Fn'+'F6'
Overrides the current BIOS setup selection governing whether both the LCD and CRT screens
are active at the same time. Changes are temporary, and revert to BIOS setup settings when the
system is rebooted. Command is active under DOS and Windows.
Expand
Command:'Fn'+'F7'
This command will force the image to fill the entire LCD screen, and is only used in DOS
applications. The changes are saved so the system will remember the setting when rebooted.
Only active under DOS or in DOS applications.
B7- 173
Setup (Power Management screen only)
This command calls up the power management Setup Utility page (page 2). When you finish
your modifications and exit, the system is restored. Note that while the system is in power
management Setup, your DOS or Windows application's state is also saved. When you leave
Power Management Setup, you automatically resume your application. The key is active no
matter which application or operating system you are using.
Invert - Normal/Reverse Video (monochrome only)
Command:'Fn'+'F8'
Command:'Fn'+'F9'