Table of Contents
Advertisement
6. Follow your progress.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown.
Drag upward on the screen to enter the fullscreen
display mode. Drag downward on the screen to
view the workout information displays.
Touch the various workout information displays
to view more options. Touch the more button
( + symbol) to view statistics or charts. Touch the
screen in any open space to view even more dis-
play mode options.
If desired, adjust the
volume level by pressing
the volume increase and
decrease buttons on the
console.
7. Pause or end the workout.
To pause the workout, first step onto the foot
rails. Next, press the Stop button or touch the
screen and then touch the pause option.
To continue the workout, press the Start button on
the console or touch the start option on the screen.
To end the workout session, step onto the foot
rails. Next, press the Stop button on the console or
touch the screen, touch the pause option, and then
touch the stop option.
Then, follow the prompts on the screen to end the
workout and return to the home screen.
8. When you are finished using the incline trainer,
turn off the console.
See HOW TO TURN OFF THE CONSOLE on
page 15.
HOW TO USE THE SLED PUSH FEATURE
1. Insert the key into the console.
See HOW TO TURN ON THE CONSOLE on
page 15. Note: It may take up to a few minutes
for the console to be ready for use.
2. Select the home screen.
See step 2 on page 17.
3. Start the walking belt and adjust the speed to
1 mph (1.6 kph). Then, adjust the incline to 0%.
See steps 4 and 5 on page 17. IMPORTANT: Do
not use the sled push feature when the incline
trainer is off or when the speed setting is
higher than 1 mph. Do not use the sled push
feature when the incline setting is higher or
lower than 0%.
4. Grip the push bar or the sled grips (see page 6)
with both hands, and use your body to manu-
ally move the walking belt at the desired speed.
HOW TO USE A FEATURED WORKOUT
To use a featured workout, the console must be
connected to a wireless network (see HOW TO
CONNECT TO A WIRELESS NETWORK on page 24).
1. Insert the key into the console.
See HOW TO TURN ON THE CONSOLE on
page 15. Note: It may take up to a few minutes
for the console to be ready for use.
2. Select the home screen or the workout library.
When you turn on the console, the home screen
will appear after the console boots up.
If a workout is selected, touch the screen and fol-
low the prompts to end the workout and return to
the home screen. If a settings menu is selected,
touch the back button (arrow symbol) to return to
the home screen.
Touch the buttons at the bottom of the screen to
select either the home screen (Home button) or the
workout library (Browse button).
18
Advertisement
Table of Contents
