Table of Contents
Advertisement
HOW TO SET UP THE CONSOLE
Before you use the incline trainer for the first time, set
up the console.
1. Connect to your wireless network.
To use iFIT workouts and to use several other
features of the console, the console must be con-
nected to a wireless network. Follow the prompts
on the screen to connect the console to your wire-
less network.
2. Customize settings.
Follow the prompts on the screen to set the desired
unit of measurement and your time zone.
Note: To change these settings later, see HOW TO
CHANGE CONSOLE SETTINGS on page 22.
3. Log into or create an iFIT account.
Follow the prompts on the screen to log into your
iFIT account or to create an iFIT account.
4. Check for firmware updates.
Touch the menu button (three horizontal lines sym-
bol), touch Settings, touch Maintenance, and then
touch Update. The console will check for firmware
updates. For more information, see step 6 on
page 23.
Firmware updates are always designed to
improve your exercise experience. As a result,
new settings and features may not be described
in this manual. Also, some settings and features
described in this manual may no longer be
enabled. Take time to explore the console to learn
how new settings and features work.
5. Calibrate the incline system.
Touch the menu button (three horizontal lines
symbol), touch Settings, touch Maintenance, and
then touch Calibrate Incline and follow the prompts
on the screen. The frame will rise and lower as it
calibrates. For more information, see step 7 on
page 23.
The console is now ready for you to begin working out.
The following pages explain the workouts and other
features that the console offers.
To use the manual mode, see page 17. To use the
sled push feature, see page 18. To use a featured
workout, see page 18. To create a draw-your-own-
map workout, see page 20. To use an iFIT workout,
see page 21.
To change console settings, see page 22. To
connect to a wireless network, see page 24.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the incline trainer. The first time you
use the incline trainer, observe the alignment of the
walking belt, and center the walking belt if neces-
sary (see page 30).
16
Advertisement
Table of Contents
