Table of Contents
Advertisement
7. Set the handrail assembly (E) on the floor in the
position shown. Attach the Push Bar Top (110)
to the Push Bar Bottom (109) with six #8 x 5/8"
Machine Screws (106); start all six Machine
Screws, and then tighten them. Do not over-
tighten the Machine Screws.
8. With the help of a second person, hold the
handrail assembly (E) below the Console (93)
as shown. Then, move both sides of the hand-
rail assembly upward at the same time, sliding
the inner corner (F) of the handrail assem-
bly between the Console and the Console
Base (92).
Next, attach the handrail assembly (E) with
four 3/8" x 5 1/2" Screws (1) and four 3/8" Star
Washers (3) (only one side is shown); start all
four Screws, and then tighten them.
Then, tighten the four 5/16" x 3/4" Patch Screws
(108) (only one side is shown).
7
106
106
109
110
8
F
108
E
11
106
E
92
3
1
93
3
Advertisement
Table of Contents
