3.1 Wall installation
11
10
Pos.
Description
1
Three-way valve
2
SCALA1 System
3
Filter
4
Feed pump (optional)
5
Rainwater tank
6
Inlet filter/float switch
7
Inlet pipe
8
Tank overflow
9
Sewer line
10
Mains water supply
11
Control box
Before installing the product, ensure that the sewage
system is at least 1 metre below where SCALA1
System is to be installed. The following requirements
must also be met:
•
The room must have an outlet pipe that is
connected to the sewage system.
•
The location must be dry and protected from rain.
•
Flat wall, in horizontal position.
•
Minimum distance from the ceiling: 50 cm.
9
8
1
2
3
7
6
We recommend installing a feed pump
with a maximum system pressure of 8 bar
if the distance between the rainwater tank
and SCALA1 System is too long.
4
5
7