Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Grundfos SCALA1

  • Page 1: Table Of Contents

    Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 SCALA1 Module Integration Guide Contents SCALA1 Module Integration Guide Introduction Purpose Use conditions Module Description Module Integration Host product exploded view Module placement in Host product Antenna placement in Host product...
  • Page 2: Introduction

    “Grundfos Go” app installed. Use conditions The SCALA1 module may only be used inside a Grundfos host product. The host product must provide an IP X4 or better enclosure to keep ingress of water away from the module.
  • Page 3 Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 • The module must contain power • Yes. supply regulation on the module • Module contains a voltage regulation • The module must contain a • Yes. permanently attached antenna, or •...
  • Page 4: Module Integration

    Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 Module Integration Host product exploded view Module placement in Host product The module must be placed in a location where there are no metal or conductive parts between the radio module and the user.
  • Page 5: Antenna Placement In Host Product

    Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 Antenna placement in Host product The module has a PCB trace “F” antenna with 0 dBi gain in the max. direction. The antenna is located outside the RF shield of the module and must be kept free of conductive parts and wires.
  • Page 6: Host Manual Considerations

    Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 Host manual considerations The host manual must contain instructions that the user may not be closer than 20 cm from the RF parts of the module.
  • Page 7: Regulation Information

    SCALA1 Module Integration Guide Version 1.0.1 Regulation information The SCALA1 module is marked with “MODEL: SCALA1”, manufacturer name and labelled with FCC ID and ISED IC. Module identification The Radio module is a monolithic PCB with the module label affixed...
  • Page 8: Ised Ic

    2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Grundfos may void the FCC & ISED authorization to operate this equipment.” Disclaimer Canadian French The disclaimer may be placed in the manual and must contain the text: “Cet appareil est conforme aux limites FCC et ISED d'exposition aux radiations qui ont été...
  • Page 9 Grundfos Holding A/S SCALA1 Module Integration Guide Version 1.0.1 Toute modification apportée à cet appareil n'étant pas explicitement approuvée par Grundfos peut annuler l'autorisation du FCC & ISED à faire fonctionner cet appareil.”...

Table of Contents