Receiving The Product; Inspecting The Product; Scope Of Delivery; Installation Requirements - Grundfos SCALA2 Installation And Operating Instructions Manual

3. Receiving the product

3.1 Inspecting the product

Check that the product received is in accordance with
the order.
Check that the voltage and frequency of the product
match the voltage and frequency of the installation
site.
Related information
2.4.1 Nameplate

3.2 Scope of delivery

The box contains the following items:
• 1 Grundfos SCALA2 pump
• 1 quick guide
• 1 safety instructions booklet
• 1 quick guide for locking pin (only for versions with
locking pin).
8

4. Installation requirements

4.1 Location

The pump can be installed indoors or outdoors, but it
must not be exposed to frost.
We recommend that you install the pump near a drain
or in a drip tray connected to a drain in order to lead
away possible condensation from cold surfaces.
The product must be installed in a well-ventilated
room to avoid condensation.
The installation location must be protected from rain,
humidity, condensation, direct sunlight and dust.
The relative air humidity must not exceed 95 %.
Install the pump in such a way that no
undesirable collateral damage can arise
due to leakage.
If the unlikely event of an internal leakage
occurs, the liquid will be drained through
the bottom of the pump.
4.1.1 Minimum space
The pump requires a minimum space of 430 × 215 ×
325 mm (17 × 8.5 × 12.8 inches).
Even though the pump does not require much space,
we recommend that you leave enough space for
service and maintenance access.
4.1.2 Installation of the product in a frosty
environment
Protect the product from freezing if it is to be installed
outdoors where frost may occur.