Meiko FV 28 G-M Operating Instructions Manual page 30

Operating instructions EcoStar 545 D-M
Datei:BA_EcoStar545D-M_9662798_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
The direct value (here the boiler temperature) is displayed for the analog inputs. Use the
"I" to go forward and the "II" to go backward until the desired input is displayed
Assignment details for the inputs are given on the assignment list for each machine.( see
17.5)
17.3.9 Viewing / modifying output status (according to code entered)
Indication
this display by pressing the "accept" key.
Viewing:
Now, the first output will be shown, with status.
Press the "I" key to move forwards and the "II" key to move backwards, until you reach the
output you require.
Modifying:
Press the "accept" key to confirm the modification of the output, the value will flash. Press
the "I" key to modify the value and press the "accept" key to save it.
The output is now set.
You can leave this level by pressing the "0" key.
Assignment details for the outputs are given on the assignment list for each machine.
(see 17.5)
17.3.10 Viewing / modifying dosing technology level
By entering code 40000 (read only) or 40044 (read / enter), the user can access the 4th
parameter level summarizing all the dosing technology parameters:
P104, P105, P218, P219, P224, P225, P321, P322, P326, P327.
See 17.4 for list of parameters
W e reserv e the right to change execution and construction!
30/44
9662798