Table of Contents
Advertisement
Figure 41. Cable routing - 10 x 2.5-inch drive SAS/SATA backplane with fPERC, Butterfly riser
Table 19. Connector descriptions for 10 x 2.5-inch drive SAS/SATA backplane with fPERC, Butterfly riser
From
BP_PWR_1 (backplane power connector)
SYS_PWR2 (system board power connector)
DST_PA3 (backplane SATA connector, cable marking BP PA3) CTRL_SRC_SB1 (fPERC connector on the backplane)
CTRL_DST_PA1 (fPERC connector on the backplane)
Figure 42. Cable routing - 8 x 2.5-inch drive NVMe backplane with fPERC, Butterfly riser, BOSS riser, SNAPI
To
SIG_PWR_1 (system board power connector)
CPU_PWR2 (PSU power connector)
SL3_CPU1_PB2 (signal connector on the system board, cable
marking MB SL3)
Installing and removing system components
53
Advertisement
Table of Contents
