ProLights Jet Hybrid200 User Manual page 39

21 - USB UPDATE MODE
NOTE: It is necessary to prepare a FAT32-formatted flash drive for the update and copy the prl files
onto it. It is advisable to use a flash drive that is empty and free of other files to facilitate the update.
Several machines can be upgraded simultaneously on the same DMX line. Necessarily there must be a
master machine to which you connect the drive and all other machines must be connected to its output
DMX line.
DMX OUT
USB Flash
Drive
(MASTER)
To update the device, proceed as follows:
1
SELECT UPDATE FILE
Path:
\FOLDER 1
\FOLDER 2
\FOLDER 3
BACK
• With the machine turned on, insert the USB drive;
• A screen will appear showing the files and folders on the USB stick, so use the UP and DOWN but-
tons to go to the directory with the update files and press ENTER (figure 1). To return to the previous
path press the LEFT button;
• Select the files to be updated. To select the desired files, move with the UP and DOWN buttons and
select the file by pressing ENTER (Figure 2);
• The selected files will be shown with a yellow square, select "NEXT" pressing RIGHT button, then
press ENTER to confirm. (Figure 2)
DMX IN DMX OUT
NEXT
PROLIGHTS - Jet Hybrid200
DMX IN DMX OUT
2
SELECT UPDATE FILE
Path: \FOLDER 2
1U1.PRL
2U1.PRL
3U1.PRL
4U1.PRL
5U1.PRL
6U1.PRL
BACK
DMX IN DMX OUT
NEXT
. . . . . . . . . . . .
. . . . . . . . . . . .
37