ProLights Jet Hybrid200 User Manual page 34

ERROR SHOWED ON
SCREEN
[MOTOR PCB 2 ERROR]
[ROTATING GOBO
WHEEL ERROR]
[GOBO ROTATION
ERROR]
[FIXED GOBO WHEEL
ERROR]
[COLOR WHEEL ERROR]
[GOBO FAN ERROR]
[MOTOR PCB 3 ERROR]
[FOCUS ERROR]
[ZOOM ERROR]
[PRISM ERROR]
[PRISM ROTATION
ERROR]
[FROST ERROR]
32
POSSIBLE CAUSES
Motor pcb 4U not detected.
Failure detected during the reset of the rotating gobo
wheel, if this wheel is not located in the default position.
Failure detected during the reset of the rotation of the
rotating gobo, if the rotating gobos are not located in
the default positions.
Failure detected during the reset of the fixed gobo
wheel, if this wheel is not located in the default position.
Failure detected during the reset of the color wheel, if
this wheel is not located in the default position.
Blower for cooling the GOBO wheel failed.
Motor pcb 5U not detected.
Failure detected during the reset of the FOCUS, if the focus
lens is not located in its default position.
Failure detected during the reset of the ZOOM system, if
the focus lens is not located in its default position.
Failure detected during the reset of the PRISM, if the focus
lens is not located in its default position.
Failure detected during the reset of the PRISM ROTATION,
if the focus lens is not located in its default position.
Failure detected during the reset of the effect FROST, if this
effect is not located in the default position.
PROLIGHTS - Jet Hybrid200
POSSIBLE PCB
WITH ANOMALY
3U - 4U
4U
4U
4U
4U
4U
4U - 5U
5U
5U
5U
5U
5U