Electrical System - Vittorazi Motors MOSTER 185 EFI Installation Manual

3.3 Electrical system

3.3.1 Signal wiring
The signal wiring is composed by the injector signal cable (1), the air rotary valve signal cable
(2), the ground cable (3), the start/stop button cable (4) and the spark coil signal cable (5).
The signal wires are clamped with an M6 F8 rubberized cable clamp (6) and an M6 F8 rubberized
cable clamp (7) that fix the signal cable, an M5 F5 rubberized cable clamp (8) that fix the start/stop
button cable (4) and the coil signal cable (5), an M4x12 screw (9) that fix the ground cable (3) and
an M5 F6 rubberized cable clamp (10) that fix the spark coil signal cable (5).
Signal wiring scheme:
Air rotary valve
Moster 185 EFI - Installation manual – V1/2024
Injector Spark coil Ground Stick
14