Table of Contents
Advertisement
Insert the vent pipe (22) supplied by Vittorazi with its end at about 30 cm from the top level
of the tank to avoid pressure variations inside the fuel tank due to changes in altitude or an
increase of temperature inside the fuel tank.
Caps equipped with a vent valve are not effective enough to keep the internal pressure of
the canister unchanged because they require minimal overpressure to allow air to escape.
Insert the brass porex filter (23) supplied by Vittorazi at the end of the vent pipe (22) to prevent
the entry of impurities inside the fuel tank.
Moster 185 EFI - Installation manual – V1/2024
Tygon Saint
Gobain LP-
1200 tube
Tank
Tube
vent
clip
Vittorazi
pass-through
fitting
41
Advertisement
Table of Contents
