Vittorazi Motors MOSTER 185 EFI Installation Manual page 32

Clamp the RJ-45 cable to the ECU signal cable to block the movement of the RJ-45 cable
due to airflow or vibration that could generate stress on the root of the RJ-45 cable.
RJ-45
cable
ECU signal
cable
Fix the RJ-45 cable to the PPG frame to lock it in position, on the side where you consider it
to be appropriate to position the display, to prevent any movement of the RJ-45 cable due
to airflow or vibration that could generate stress on the root of the RJ-45 cable.
Take care to leave a wide bend on the RJ-45 cable between the two fixing points to allow the
ECU box to swing around its rubber mounts without pulling the RJ-45 cable.
Moster 185 EFI - Installation manual – V1/2024
RJ-45
cable
Frame
32