Place the Velcro display holder supplied by Vittorazi on the PPG frame arm that you consider
appropriate.
Bend and tighten the deformable legs of the display support around the PPG frame arm and lock
the display support in place by wrapping the deformable legs with the Velcro strap.
Make sure the display holder is securely fixed to the PPG frame arm.
Attach the display on the Velcro display support.
Pass the 90° plug of the RJ-45 cable through the elastic band provided on the display support.
Elastic
90° RJ-45
band
plug
Moster 185 EFI - Installation manual – V1/2024
33