Vittorazi Motors MOSTER 185 EFI Installation Manual page 36

For the installation of the fuel system, the fuel tank must be equipped with two M10 holes
on which must be installed the two Vittorazi threaded pass-throughs for the supply and
return lines from the FBU.
If the tank is equipped with a ring nut connector, the Vittorazi ring nut connector pass-
through can be used.
The Vittorazi pass-throughs have been designed specifically for the use of pipes with a
smaller diameter than the usual pipes used for the fuel line to minimise the risk of air bubble
accumulation along the line.
Secure all joints with the tube clips supplied by Vittorazi to prevent leakage and unwanted
movement.
Moster 185 EFI - Installation manual – V1/2024 36