Table of Contents
Advertisement
3.2 Supports to the frame
The engine is fixed to the aircraft frame through the 4 spacers (1) that are connected to the 4
dampers (2). Do not replace the dampers (2), as they are designed and approved for this engine.
Use M8 screws for fixing, taking care not to rotate and damage the rubber part. The vibration
dampers reduce the vibrations transmitted from the engine to the frame. For safety reasons,
straps are fitted around the vibration dampers.
The components to be installed, in particular the fuel tank, fuel hoses and the battery, must
have a certain distance from the exhaust system as high temperatures are reached during
engine operation.
Moster 185 EFI - Installation manual – V1/2024
12
Advertisement
Table of Contents
