Vittorazi Motors MOSTER 185 EFI Installation Manual page 16

3.3.2 Power supply wirings
The power supply wiring is composed by the ECU supply cable (1), the EGT and CHT probes
cable (2), the starter relay power cable (3).
The power supply wires are clamped with an M5 F6 rubberized cable clamp (4) that fix the ECU
supply cable (1) and the EGT and CHT probes cable (2), a plastic cable clamp (5) that fix the EGT
and CHT probes cable (2) and two plastic cable clamps (6, 7) that fix the starter relay power cable
(3).
Power supply wiring scheme:
Starter relay
Moster 185 EFI - Installation manual – V1/2024
EGT sensor CHT sensor ECU supply
16