Chapter 10
Utilities
To Add a Test Code I.D. Prefix to All
Symbologies
This selection allows you to turn on transmission of a Code I.D. before
the decoded symbology. (See the
) for the
Symbology Chart on page A-1
single character code that identifies each symbology.) This action first
clears all current prefixes, then programs a Code I.D. prefix for all sym-
bologies. This is a temporary setting that will be removed when the unit
is power cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Software Revision
Scan the bar code below to output the current software revision, unit
serial number, and other product information.
Show Revision
Show Data Format
Scan the bar code below to show current data format settings.
Data Format Settings
Product Reference Guide
10-1