Wasp 2D Reference Manual page 85

2d imager
Hide thumbs Also See for 2D:
Table of Contents

Advertisement

EAN/JAN-13 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/
JAN-13 bar codes that have addenda. Default = Not Required.
Required
EAN/JAN-13 Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = On.
* On
NOTE
ISBN Translate
This selection causes EAN-13 Bookland symbols to be translated into
their equivalent ISBN number format. Default = Off.
On
Product Reference Guide
If you want to enable or disable EAN13 with
Extended Coupon Code, refer to
13 with Extended Coupon Code on page 6-21
Linear Symbologies
* Not Required
Off
UPC-A/EAN-
.
* Off
6-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duraline

Table of Contents