Wasp 2D Reference Manual page 130

OCR Programming
To create this template, you would enable the OCR-A font. Scan the
Enter OCR Template
gramming Chart on page B-4
scan
2041424320
acters for "space," "A," "B," "C," "space"). Scan the
then scan
Save OCR Template
string of three digits, space, "ABC," space, then any string of three digits.
For example:
NOTE
4. Exit OCR Template Editor
Scan
Save OCR Template
exits without saving any OCR Template changes.
plate
Stringing Together Multiple Formats
(Creating "Or" Statements)
You may want to program the imager to accept many OCR formats. To
do this, you would string together each format with a "t." This tells the
imager to read optical characters that match any one of the formats in
the template.
Example:
You need to read any combination of eight digits, or a combination of four
digits, two uppercase letters, and two digits. The template would be:
To create this template, you would enable the OCR-A font. Scan the
Enter OCR Template
gramming Chart on page B-4
statement. Then you would scan the characters for the second template.
Scan four times, scan
d
Save OCR Template
format, for example:
8-8
symbol (
page 8-16
in the back of this manual three times, then
from the
Programming Chart on page B-5
(
page 8-17
551 ABC 983
If using PowerView to program, use the space
bar to designate a space and not the hex value
of 20.
to save your entries.
ddddddddtddddlldd
symbol (
page 8-16
eight times, then scan the
two times, then scan
l
( ). This would let you read either type of
page 8-17
99028650
9902XZ50
). Scan the
d
). This would let you read any
). Scan the
d
two more times. Scan
d
or
DuraLine™ 2D Imagers
from the
OCR Pro-
(the hex char-
three more times,
d
Discard OCR Tem-
from the
OCR Pro-
to create the "or"
t