Wasp 2D Reference Manual page 86

Symbologies
EAN/JAN-8
EAN/JAN-8 Enable
* On
EAN/JAN-8 Check Digit Transmit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
* On
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8
data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
6-26
<Default All EAN/JAN-8 Settings>
Off
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
DuraLine™ 2D Imagers