Utilities
Resetting the Standard Product
Defaults
If you aren't sure what programming options are in your imager, or
you've changed some options and want the standard product default set-
tings restored, scan the Standard Product Default Settings bar code below.
Menu Commands on page 11-6
for each of the commands (indicated by an asterisk (*) on the program-
ming pages).
Test Menu
When you scan the Test Menu On code, then scan a programming code
in this manual, the imager displays the content of a programming code.
The programming function will still occur, but in addition, the content
of that programming code is output to the terminal.
NOTE
On
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of the
imager where the data from the successful read of a 2D bar code symbol
is augmented with lines of text that both identify the symbol, and also
report graded measurement parameters obtained from it.
10-2
Standard Product Default Settings
lists the standard product default settings
This feature should not be used during normal
imager operation.
* Off
DuraLine™ 2D Imagers