Ocr Template Codes - Wasp 2D Reference Manual

OCR Programming
4.) when the modulo 11 check character "0123456789X" is pro-
grammed.
Please note that all these commands can be combined into a single serial
programming command:
OCRENA2,TMP"ISBNggggggggggggctCdddd hdddEtCdddd
hddddE",GPG"0123456789-",GPH"P\",CHK"0123456789X".
These commands can be encoded into the following Aztec Code symbol:

OCR Template Codes

NOTE
Enter OCR Template †
Enter User-Defined
Variable "h"†
†
One or more two-digit numbers and
symbol. Refer to the
8-16
Reading more than three rows of OCR is not
recommended. Contact the factory if you have
an application that requires reading four or
more rows of OCR.
Save
Programming Chart on page B-5
Enter User-Defined
are required after reading this programming
of this manual.
DuraLine™ 2D Imagers
Variable "g"†