Table of Contents
Advertisement
10 CLEANING
[Cleaning the lower edge control roller]
(1)
(5)
72
1. Press the
2. Press the NOZZLE switch to raise the nozzle (1).
3. Remove the cloth plates (3) and (4).
4. Use a soft cloth to wipe off any glue, dirt or other foreign
particles which are adhering to the lower edge control
roller (5).
5. After removing the cloth plate to clean it, re-install it
securely in its original position.
NOTE:
Do not use hard objects such as tweezers to clean the lower
edge control roller (5), as such objects may cause damage.
If dirt cannot be removed, wipe the roller with a cloth which is
lightly soaked in ethanol to clean it.
BM-2000
key to display the home screen.
Advertisement
Table of Contents
