Table of Contents
Advertisement
4.
Loosen the three screws of the lower feed unit as shown in the illustration, and push the feed motor toward the back.
Screw (socket bolt)
5.
Loosen the set screws which are securing the lower roller and its drive pulley (in 2 places for each part).
6.
Move the lower roller shaft in the direction shown in the illustration and replace the lower roller.
Actual view
Screw (Hexagonal bolt)
Pulley
Lower roller
Lower roller shaft
At this time, check the D cut position of the
shaft in preparation for the next step.
BM-2000
11 PART REPLACEMENT METHOD
Feed motor
83
Advertisement
Table of Contents
