Table of Contents
Advertisement
(1
)
(3
)
4. Use a soft cloth to wipe the upper roller (1), lower roller
(3) and nozzle lower roller (4) clean.
NOTE:
Do not use hard objects such as tweezers to clean the
upper roller (1), lower roller (3) and nozzle lower roller
(4), as such objects may cause damage.
If dirt cannot be removed, wipe the roller with a cloth
which is lightly soaked in ethanol to clean it.
5. While turning the upper roller (1), lower roller (3) and
nozzle lower roller (4), wipe them until no dirtiness
remains.
6. Press the
switch machine back to gluing mode.
* The display will return to normal status from reverse
mode.
(4
)
BM-2000
10 CLEANING
key to lower the upper roller (1) and to
63
Advertisement
Table of Contents
