Berbel Skyline Edge Base Operating And Installation Instructions page 115

Cleaning
. CAUTION!
Danger of injuries due to device edges!
When removing and replacing the lower section or the cross
flow, fingers may become trapped and crushed.
1 Move the device parts slowly and carefully.
. ATTENTION!
Danger of damage due to falling parts!
The lower section and the Capillar Trap can fall down when
being removed and damage the hob, the kitchen furnishings
or other objects.
1 Hold the parts tightly when removing.
1 Protect the area below the device (e.g. using thick
cardboard).
Lower section
The faceplate with the lower section is held in the device by
magnets.
1 Fold the faceplate down.
6006890_0 – 21.11.2023
1 Lift up the rear lower section.
1 Take out the front lower section.
1 Clean the upper section with a soft, moist cloth.
1 Clean the lower section with a soft, moist cloth or in a
dishwasher.
1 Dry the upper and lower sections with a soft cloth.
1 Insert the front lower section.
1 Press down the rear lower section.
1 Fold the faceplate up until the retaining magnets lock in
audibly.
Capillar Trap
The Capillar Trap is inserted in the device over the lower
section, and is held by magnets.
1 Grasp the Capillar Trap on its sides with both hands.
1 Pull the Capillar Trap out.
1 Clean the Capillar Trap e.g. in a dishwasher.
1 Clean the surfaces and edges on the recess for the
Capillar Trap with a soft, moist cloth.
1 Make sure that the Capillar Trap is completely dry.
1 Re-attach the Capillar Trap.
115