JVC HR-S10EG Service Manual page 23

RECORDING WITH A VIDEO CAMERA
Video camera
CAUTION:
Use a video camera whose power con-
| sumption does not exceed 10 watts.
[Connect a video camera. Gi Press REC/AUFN. and PLAY/WIEDERG. simultane-
For powering the recorder, refer to pages 7, 8 and 9. ously.
®@ To stop recording temporarily, operate the start/
stop switch to enter the Recording Standby mode.
{ Toend recording, press STOP.
© If the battery power becomes insufficient during
battery operation, the BATT. indicator flickers and
then the recorder is automatically switched off. In this
case, recharge the battery or replace it with a charged
one,
@ When a microphone is connected to the recorder's
microphone jack, sound from the camera's built-in
microphone cannot be recorded.
—14-