PLAYING BACK A VIDEO CASSETTE
if
TV receiver
i
XK
—_
SPURLAGE control
BI switch on the TV receiver.
Load a pre-recorded cassette.
Adjust the TV receiver's channel to your video channel.
E¥ Press PLAY/WIEDERG.
(For connection to a TV receiver, refer to page 10.)
Press STOP at the end of the programme.
Press POWER/BETRIEB to ON,
Note:
@
Noise bars may appear on the screen if you play back a
tape which
was
recorded
using another
recorder.
In
such cases, adjust the TRACKING/SPURLAGE
con-
trol. Turn it in either direction to adjust the picture.
After playing a particular tape, return the control knob
to the centre position.
-~16—