JVC HR-S10EG Service Manual page 110

Infrared remote control unit
Infrared-ray
transmitting port
LED:
indicator
(EK type)
Notes:
.
Avoid violent shocks, especially take care not to drop
the unit.
@ Take care not to allow liquid to spill into the unit.
Do not place heavy objects on the unit.
@ Avoid leaving the unit in places subject to direct sun-
light or extremely high temperatures.
The infrared remote control unit gives you operation
control from your viewing position. It can control not
only the TU-S10EK, but also the HR-S10EK through the
TU-S1OEK when they are connected in a single-piece
system. The maximum operating distance is about 8 m.
CL Power ON/OFF buttons
To switch power on or off for the system.
@ Channel number buttons
These buttons are used to call up the desired TV pro-
gramme channel. (On the tuner the CHANNEL V/
A button @ performs this same function.)
The channel number will be displayed on the channel
display section of the fluorescent display.
@ CHANNEL select buttons ("/ A)
@ FF/SHUTTLE SEARCH button
@® PLAY button
@© REW/SHUTTLE SEARCH button
@ REVERSE PLAY button
PAUSE button
@ STOP button
@ Record button (REC)
Installing the batteries
1, Slide the battery com-
partment cover on the
rear of the unit in the
direction of the arrow
, Om)
| 2. Insert 2 "R6"-size batteries (provided) in the
correct directions into the battery compartment.
i
3. Replace the cover.