Automatic Timer Recording - JVC HR-S10EG Service Manual

AUTOMATIC TIMER RECORDING
The 14-day/8-event programmable timer permits
recording of preset channels on preset days, at preset
times for preset lengths while you are away,
REPEATMWIEDERHOL. button—
Do not leave a microphone
or a Camera connected.
- CANCEL/LOSCHEN button
ff Press POWER/BETRIEB.
Load a cassette. 2
Set INPUT SELECT/EINGANGS-WAHL to TV.
@ Press PROGRAM/AUFZ. NR.
@ The display will change to the Timer Set mode. You
are ready to enter the data into No. 1 programme
memory. If you want to change the programme
number, press the PROGRAM/AUFZ. NR button a
required number of times.
. 0
svaay stop ProG
Press START for day and switch-on time setting.
@ The START indicator will flash,
Press DAY/TAG to obtain desired "day" indication.
Press HOUR/STUNDE to obtain desired "hour" indi-
cation.
-16-
EE] Press MIN+ or MIN- to obtain desired "minute" indi-
cation,
&) Press STOP for switch-off time setting.
@ The STOP indicator will flash.
[ Press HOUR/STUNDE to obtain desired "hour" indi-
cation,
Press MIN+ or MIN— to obtain desired "minute" indi-
cation.
1 Press CHANNEL/TV. PROG. for setting the channel
from which you want to record.
@ The PROG. indicator will flash.
Press CHANNEL/KANAL " A" " or" v " to obtain
desired channel indication.
{ Press CLOCK/UHR to change the display to the Clock
mode,
@ If no command is entered within about 60 seconds,
all displays will be restored automatically.
IB Press TIMER/SCHALTUHR to ON/EIN.
@ The TIMER indicator will light together with the
numbers of the programmed memories.