JVC HR-S1902U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S1902U:

Advertisement

Quick Links

LPT0733-001A
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC S-VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
VIDEO CASSETTE RECORDER
HR-S1902U
,
d
— 1 —
INSTRUCTIONS
NOTE:
Change or modifications not approved by the party responsible
for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for
help.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated. Do not recharge, disassemble, heat
above 100°C or incinerate.
Replace battery with CR2032. Panasonic (Matsushita Electric)
or Maxell is recommended.
Danger of explosion or Risk of fire if the battery is incorrectly
replaced.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
Declaration of Conformity
Model Number:
HR-S1902U
Trade Name:
JVC
Responsible Party:
JVC Americas Corp.
Address:
1700 Valley Road Wayne, N.J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Printed in China
1102 MNV f PJ f BJ

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-S1902U

  • Page 1 LPT0733-001A COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. Dear Customer, Thank you for purchasing the JVC S-VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new VCR. CAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2: Important Product Safety Instructions

    ...on a surface that is unstable or subject to vibration. 2. DO NOT block the VCR’s ventilation openings. 3. DO NOT place heavy objects on the VCR or on the Remote. 4. DO NOT place anything which might spill on the top of the VCR or on the Remote.
  • Page 3 Point the Remote towards the remote sensor on the target component. The maximum operating distance is about 8 m. To operate a JVC TV, use any of the following buttons: TV POWER, TV INPUT, TV CH+/– or TV VOL +/–.
  • Page 4: Buttons, Connectors And Indicators

    S-VHS indicator On-screen display If you press OSD (OK) on the Remote when “SUPERIMPOSE” is set to “ON” ( TV screen. The indications are not recorded even if the VCR is in the recording mode. S-VIDEO Channel and auxiliary input...
  • Page 5: Connections And Plug&Play Setting

    Final preparation for use Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. You can now perform basic playback or basic recording.
  • Page 6: Initial Settings

    Initial Settings Language Setting The default setting is “ENGLISH”. Turn on the VCR and TV, and select the VCR channel (or AV mode). Access Main Menu screen, then Initial Set screen Press MENU on the Remote. Press move the highlight bar (arrow) to “INITIAL SET”, then press OK or...
  • Page 7: Tuner Setting

    Tuner Setting Turn on the VCR and TV, and select the VCR channel (or AV mode). Setting channels automatically — Auto Channel Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. Access Main Menu screen, then Tuner Set screen Press MENU on the Remote.
  • Page 8: Playback Features

    Locating beginning of timer recordings — Instant Review After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW. The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically.
  • Page 9: Recording Features

    ), press PLAY ( NOTE: If “AUTO PICTURE” is set to “ON” ( the VCR takes about 7 seconds to assess the quality of the tape in use, then recording begins with the picture level optimized. During recording Pause recording...
  • Page 10: Timer Recording

    Up to 8 timer recording programs can be made using express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. Turn on the VCR and TV, and select the VCR channel (or AV mode). NOTES: If all the 8 programs have already been set, “PROGRAM FULL”...
  • Page 11: Other Functions

    The timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.
  • Page 12 (on-screen display) appears on the screen. NOTE: When you use this VCR as the playback VCR for editing a tape, be sure to set this function to “OFF”; otherwise, the VCR status information (on-screen display) will be recorded on the edited tape.
  • Page 13 Editing You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
  • Page 14: Specifications

    Specifications GENERAL Power requirement : AC 120 V Power consumption Power on : 16 W Power off : 1.5 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to 140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 mm x 94 mm x 248 mm (17-3/16"...
  • Page 15: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: What We Will Do

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.

This manual is also suitable for:

Hr-s1902us

Table of Contents