Table of Contents
Advertisement
ATTACHING AND REMOVING POWER SUPPLY UNITS
© The
method
of attachment
and
removal
is identical for all power
supply units.
©@ Be sure to switch off all power
switches
before
attachment
or
removal.
© Check to see if the power terminals
on the rear of the unit are covered
with the terminal
cover.
If not,
slide the
terminal
cover
in the
direction of the arrow.
terminals
Terminal cover
To attach
To remove
GB Write pressing the BATT. but-
ton
Slide until the unit locks in piace.
.. . slide off.
Note:
Check to see if power can be switched
on or off with the POWER/BETRIEB
button.
If not,
remove
the
power
supply unit and, after a few seconds,
reattach it.
Advertisement
Chapters
Table of Contents
