Table of Contents
Advertisement
5. Number of Screws
The user can choose to set up the number of screws in one complete assembly process
(one work piece), when all the screws are fastened correctly in a complete assembly
process, "all ok" will be shown.
6. Screw Counter
When the screw counter is activated (click Yes), and when error occurs during the
fastening process, a lock on the system will be activated, and the lock needs to be
deactivated before continuing.
Screw Counter Settings
7. Screw Counter Reset
A reset icon will appear on the real time monitoring screen if "single" or "all" is
selected, if "none" is selected the reset icon will not appear on the real time
monitoring screen. When "single" is selected, and the user click on the reset icon on
the real time monitoring screen after a fastening cycle, only the previous fastening
cycle will be reset. When "all" is selected the screw counter will be reset to 0.
Screw Counter Reset Options
62
Advertisement
Table of Contents
