Table of Contents
Advertisement
RPM Setting and Seating Stability Control
9. Target Torque Offset
Displayed torque offset setting is for the user to manually adjust the displayed torque
on the system (Control Unit) when there is a constant amount of disparity between the
torque value displayed on the system and the value displayed on a benchmark such as
the torque tester.
Torque Value Offset
10. System Lock Settings
When any errors occur during fastening, the user can choose to lock the system to
avoid further use of the tool. Press Yes to activate system lock and choose from the
following six conditions of which the system should be locked. Press no to skip this
setting. Please note that between "time" and "turn" method of detection, the user can
only choose one for the system lock.
32
Advertisement
Table of Contents
