Initial Setting - Kemp kti ETS-LS06 User Manual

4.2.2. Initial Setting

When the system is activated for the first time or after the system is reset to default
setting, the password of the system manager (highest level of access) needs to be set,
the user can do this either on the user interface of the Control Unit or on the web
interface.
1. Step One
Click on any page that requires a level of system access right.
2. Step Two
A pop-up window will prompt the user for password, please enter 111111 and click
confirm.
Entering the Password
If the password is lost, please click on "Lost Password" on the top right hand side
corner, the user will see another pop-up window that prompts the user to enter a set of
provisional password, which can be obtained through customer service provider, and
the user needs to provide the serial number of the Control Unit (this process can only
be performed on the web interface).
When the provisional password is entered, please click yes to reset the system and the
system will return to its default setting, and the user can begin the initial setting
process again.
52