2. Fastening Detection
Choosing the one of two methods of detection (fastening duration (time) or number of
turns), from start to seating of the screw
3. Detection Method: Time
When "Time" is chosen, the following set up page will appear
A. Target Time: the time it takes for the screw to reach seating position. Range:
0-4 Seconds
B. Maximum Time: Upper limit of the time. Range: 0-4 Seconds
C. Minimum Time: Lower limit of the time. Range: 0-4 Seconds
Press on the numerical value to activate keypad
Methods of Fastening Detection
Setting of "Time"
29