Table of Contents
Advertisement
4. Detection Method: Number of Turn
When "Turns" is chosen, the following page will appear
A. Target Turns: the number of turns (revolution)for the screw to reach seating
position. Range: 0-99 turns
B. Maximum Turns: Upper limit of the number of turns. Range: Target number
of turn to 99 turns.
C. Minimum Turns: Lower limit of the number of turns. Range: 0 turn to target
number of turn.
Press on the numerical value to activate keypad
5. Number of Screws
The user can choose to set up the number of screws in one complete assembly process
(or one work piece), when all the screws are fastened correctly in a complete
assembly process, "all ok" will be shown, this is to prevent accidental omission of
screws.
Press on the numerical value to activate keypad.
Number of Turns
30
Advertisement
Table of Contents
