Table of Contents
Advertisement
Description
1
System Starts
2
Calibration Mode
3
System Restarts After Calibration
4
Torque Value is Entered During Calibration
5
OK
6
NG (Fastening Error)
7
Screw Counting Completed
Error Code
2.
When errors occur, it will be displayed as shown in the following screen, and please
refer to the following chart for description of the error codes.
Error Code
EA-01
EA-02
EA-03
EA-04
EA-05
EA-06
System Beep Codes
Error Code Display
Description
Exceeds Max. Torque
Min. Torque not attained
Exceeds maximum time
Min. time not attained
Exceeds maximum turns
Min. turns not attained
Error Code Description
22
Sound
Short Beep Once
Short Beep Twice
Long Beep Once
Short Beep Twice
Short Beep Once
Long Beep Once
Short Beep Twice
Advertisement
Table of Contents
