Chapter 4 - Antennas; Antenna System Cellular Devices; Requirements For Cellular Antennas With Regard To Fcc/Ic Compliance; Cellular Antenna - Multitech SocketModem Cell Cat M1 Device Manual

Chapter 4 – Antennas

Antenna System Cellular Devices

The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. Devices were approved with the following antenna(s) and for alternate
antennas meeting the given specifications.
The antenna system is defined as the UFL connection point from the device to the specified cable specifications
and specified antenna specifications.

Requirements for Cellular Antennas with regard to FCC/IC Compliance

This device has been designed to operate with the antennas listed below and having a maximum antenna gain of
6.18 dBi for the 700 MHz band, 6.00 dBi for 1700 MHz band, and 9.01 dBi for the 1900 MHz frequency band.
Antennas not included in this list or that have a gain greater than specified are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.

Cellular Antenna

Cellular devices were approved with the following antenna:
Manufacturer:
Model Number:
MultiTech ordering information:
Model
ANLTE4V2-1HRA
ANLTE4V2-2HRA
ANLTE4V2-10HRA
ANLTE4V2-50HRA

Cellular Antenna Specifications

Category
Frequency Range
Impedance
VSWR
®
SocketModem Cell Cat M1 MTSMC-MNG6 Device Guide
Wieson
ARY118-0167-001-00
Quantity
1
2
10
50
Description
617-960 MHz
1447-2690 MHz
3300-3800 MHz
50 Ohms
619-960 MHz: 2.5:1
1447-2690 MHz: 2:1
3300-3800 MHz: 2:1
ANTENNAS
19