Multitech SocketModem Cell Cat M1 Device Manual page 35

FCC Rule Part
27
27
27
27
27
27
27
90
90
90
90
Output power is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators.
This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter
evaluation procedures as documented in this filing. End-users may not be provided with the module installation
instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying
RF exposure compliance.
The highest antenna gain including cable loss, must not exceed 8.0 dBi for Band 2 and Band 25, 5.0 dBi for Band 4
and Band 66, 9.4 dBi for Band 5, 8.7 dBi for Band 12, 9.1 dBi for Band 13, 9.3 dBi for Band 26, 6.9 dBi for
GPRS/EDGE 824-849MHz Band, 2.5 dBi for GPRS/EDGE 1850-1910MHz Band . This device contains functions that
are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
®
SocketModem Cell Cat M1 MTSMC-MNG6 Device Guide
Frequency Range Power Output
(MHz) (mW)
699.1 - 715.9 0.23
699.7 - 715.3 0.22
699.7 - 715.3 0.2
777.1 - 786.9 0.19
777.1 - 786.9 0.23
779.5 - 784.5 0.2
779.5 - 784.5 0.2
814.1 - 823.9 0.2
814.1 - 823.9 0.21
814.7 - 823.3 0.22
814.7 - 823.3 0.21
REGULATORY INFORMATION
Frequency Tolerance
(PPM)
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
2.5 PM
Emission
Designator
184KG7D
1M10G7D
938KW7D
129KG7D
184KG7D
1M10G7D
939KW7D
127KG7D
190KG7D
1M10G7D
925KW7D
35