Araknis Networks® 310 Series Router
User Interface Manual
Advanced > NAT
This configures devices on the LAN so that they appear to have a specific public (WAN) IP address. You
must enable this to use and edit NAT entries.
1:1 NAT Section
This shows all NAT entries in tabular format.
To create a new entry, click the Add 1:1 NAT Rule button.
•
LAN IP: Enter a single IP address or a range to be represented by the specified WAN IP address.
WAN IP: Enter the desired public IP address for use.
•
Click the Trashcan to delete an existing line from the table
Route Binding
This allows you to determine which LAN subnets are routed to a specific WAN interface.
To create a new entry, click the Add/Modify Route Binding button.
•
Subnet (Network Address): Enter the starting IP address of the VLAN you wish to bind to the Route.
•
Subnet Mask: Enter the Subnet Mask of the VLAN you wish to bind to the Route.
•
Route: Select the WAN interface this traffic will flow through.
Click the Trashcan to delete an existing line from the table.
-Return to Table of Contents-
38
Advanced > NAT