Table of Contents
Advertisement
Araknis Networks® 310 Series Router
User Interface Manual
Advanced Options
-Return to Table of Contents-
•
Aggressive Mode – Check the box to enable Aggressive Mode.
•
Compress (Support IP Payload Compression Protocol
(IPComp)) – Check to enable Compression.
•
AH Hash Algorithm – Check to enable AH Hash Algorithm
Select the type from the drop-down.
•
NetBIOS Broadcast – Check to enable NetBIOS Broadcast.
•
Keep Alive/Dead Peer Detection Interval (Seconds) – Check
to enable and set the Dead Peer Detection Interval.
•
Tunnel Backup – Check to enable Tunnel Backup. Enter the
following values to configure the setting:
•
Remote Backup IP Address – Enter the IP address of the
backup tunnel.
•
Local Interface – Select which port to use for connecting
the backup tunnel.
•
Remote Backup IP or URL – IP address or Domain to
fall back to in case of disconnection.
•
VPN Tunnel Backup Idle Time (seconds) – Set the
amount of time to wait before switching to the backup
tunnel. (Range: 30~999)
•
Split DNS – Check to enable Split DNS.
•
DNS1/DNS2 – Enter the Split DNS addresses.
•
Domain Name 1/2/3/4 – Enter up to four domain names.
41
Advanced > NAT
Advertisement
Table of Contents
