Table of Contents
Advertisement
Araknis Networks® 310 Series Router
User Interface Manual
VPN users are provided with a configuration file generated by the OpenVPN server. This file is used as a
key for the client application to communicate with the server and open a connection. The router must be
configured for each OpenVPN account that will be used.
Client applications are available for PC and Mac computers and iOS and Android mobile devices.
Click the Regenerate a Key button to create a new cryptographic key for your VPN. Your users must then
download the new config file to continue to use the established tunnel.
IPSec Section
Configure a VPN between two routers so that devices on each network can communicate through the VPN
tunnel.
Click the + Add New Tunnel button to create a new IPSec tunnel.
•
Tunnel No. – Number identifying the tunnel being configured.
•
Tunnel Name – Name for the tunnel to make it easily identifiable.
•
Interface – Port the VPN will connect through. Options: WAN1, WAN2, and WAN3.
•
Enable – Check the box to enable the new tunnel.
•
Mode – Gateway to Gateway is the only option.
-Return to Table of Contents-
39
Advanced > NAT
Advertisement
Table of Contents
