Table of Contents
Advertisement
Araknis Networks® 310 Series Router
User Interface Manual
Bandwidth Control Setup Instructions
Before You Begin
•
Calculate the bandwidth requirements for all Bandwidth Control rules and make sure that remaining
bandwidth is sufficient for unregulated clients.
•
We recommend reserving no more than 80% of the available bandwidth from the ISP in the rules you
create. This guarantees that bandwidth will remain available for unspecified IPs.
Configuration Instructions
1.
Log into the router interface and navigate to the Bandwidth Control menu: Advanced > Bandwidth
Control.
2. Insert the maximum bandwidth values into the appropriate Interface Bandwidth Setting fields (second
menu on the page). In this example, only the WAN1 interface is being used.
3. Click the Add button under the Bandwidth Control Settings menu. A new entry line will appear for
adding bandwidth management rules.
4. Create rules to regulate the bandwidth as needed.
5. After all of the rules have been created, click the Apply button to save the new configuration.
6. See the next page for additional information about the example shown above.
-Return to Table of Contents-
Bandwidth Control Setup Instructions
57
Advertisement
Table of Contents
