Table of Contents
Advertisement
Araknis Networks® 310 Series Router
User Interface Manual
Multi-WAN Section
Network Service Detection regularly checks to ensure that the network connection is active, using a ping
test and/or a Domain Resolution test. If it detects that the network is inactive, it performs the action
selected in the dropdown.
When Network Service Detection is enabled, you can opt to use any or all of the three detection methods
listed to ensure your router is connected to the Internet. Actions are described below.
•
Log Only: Logs any NSD related events against the system log.
•
Log and Reboot: Logs and then reboots the primary and secondary wan interface(if available) to
restore service.
•
Log and Failover: Logs and then fails over to the secondary or tertiary WAN interface. In the event
primary wan is restored, the system will fail back over.
Note - Today, users will not be able to select which WAN the system fails over to. The system will
prioritize according to WAN interface, first WAN1, next WAN2, then WAN3.
-Return to Table of Contents-
22
Settings > WAN
Advertisement
Table of Contents
