Component Descriptions - HPE Aruba Networking EdgeConnect 10106 Installation Manual

Table 3 Package Contents (Continued)
Item
Rubber feet
Wall mount kit (2 screws, 2 anchors)
Power cord retainer clip

Component Descriptions

Optional accessories are available for use with the HPE Aruba Networking EdgeConnect 10106 SD-WAN
Gateway and are sold separately. Contact your HPE Aruba Networking sales representative for details and
assistance.
This section introduces EdgeConnect 10106 SD-WAN Gateway components and their location on the
Gateway.
Figure 1
Figure 1 Front Panel of the HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
Figure 2 Back Panel of the HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
Front Panel LED Indicators
Front panel LED indicators show the power and PoE status of the EC-10106. The following table
describes the LED indicators and their corresponding status:
Table 4 LED Status
LED
lan0
lan1
power
(light bulb icon)
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
shows the front panel of the EC-10106.
lan0 (top) lan2
lan1
Function
PoE Status
PoE Status
Power Status
Figure 2 shows the back panel of the EC-10106.
wan2 wan0 (top) console
wan1 (bottom)
Indicator
Green (Solid)
Off
Green (Solid)
Off
Green (Solid)
Amber (Solid)
Off
| Installation Guide
Quantity
mgmt0 (top) USB
mgmt1 (bottom)
2.50A
Status
PoE Power Provided
PoE Power Not Provided
PoE Power Provided
PoE Power Not Provided
Powered and Operational
Unit is in Error state
Power is Off
Gateway Components |
4
1
1
6