Table of Contents
Advertisement
Mgmt Port LEDs
Figure 8
Figure 8 Mgmt Port LEDs on the EdgeConnect 10106 SD-WAN Gateway Front Panel
Table 9
describes the behavior of the Mgmt port LEDs.
Table 9 Mgmt Port LED Behavior
LED
LINK/ACT
STATUS
USB Type C Console Port
The EdgeConnect 10106 SD-WAN Gateway is equipped with a USB Type C connector that provides
console access for direct local access. If both USB and RJ-45 console ports are connected, the USB
connection takes precedence over the RJ-45 console connection.
USB Type C Driver
To use the USB console port, you must install the HPE Aruba Networking USB driver on the computer
that will manage your SD-WAN. To download the driver, perform the following steps:
1. Go to https://asp.arubanetworks.com.
2. Click on the Software & Documents tab.
3. In the Search Files field, enter USB Console and press Enter.
4. Click on the download icon for appropriate file for your application. The corresponding operating
system is in the file name.
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
highlights the position of the Mgmt port LEDs on the front panel of the Gateway.
Function
Mode
Link status
NA
Port status
Speed
Indicator
Status
Green (Solid)
Link established
Green (Blinking)
Port is transmitting or receiving data
Off
No link
Green (Solid)
Link at 1000 Mbps
Off
Link at 100/10 Mbps
| Installation Guide
Gateway Components |
10
Advertisement
Table of Contents
