Specifications, Safety, And Compliance; Edgeconnect 10106 Sd-Wan Gateway Specifications; Safety And Regulatory Compliance - HPE Aruba Networking EdgeConnect 10106 Installation Manual

EdgeConnect 10106 SD-WAN Gateway Specifications

Physical
Device Dimensions (without mounting brackets) (HxWxD): 4.37 cm (1.72") x 29.48 cm (11.61") x

20.105 cm (7.92")
Device Weight: 2.305 kg (5.08 lbs)

Electrical
Ethernet

2 x 10/100/1000Base-T Auto-sensing Ethernet RJ45 port with PoE

2 x 1G Combo ports (10/100/1000BASE-T Auto-sensing Ethernet RJ45 / 1G SFP Transceiver

Cage)
2 x 1G/10G SFP+ cage

Power

54V DC power interface, supports powering through a 54V DC, 3.05A AC-to-DC power adapter.

Environmental
Operating

Temperature Range: 0° C to 40° C (32° F to 104° F)

Humidity Range: 10% to 90% (RH), non-condensing

Storage and Transportation

Temperature Range: –40° C to 70° C (–40° F to 158° F)

Humidity Range: 10% to 95% (RH), non-condensing

For additional specifications on this product, please refer to the data sheet. The data sheet can be
found at www.arubanetworks.com

Safety and Regulatory Compliance

HPE Aruba Networking provides a multi-language document that contains country-specific
restrictions and additional safety and regulatory information for all HPE Aruba Networking products.
This document can be viewed or downloaded from the following location:
safety_addendum
HPE Aruba Networking gateways must be installed by a professional installer. The professional installer is
responsible for ensuring that grounding is available and meets applicable local and national electrical codes.
HPE Aruba Networking EdgeConnect 10106 SD-WAN Gateway
Specifications, Safety, and
| Installation Guide
Chapter 4
Compliance
www.arubanetworks.com/

Specifications, Safety, and Compliance |

24